So I bought a fanless firewall appliance with 4x2.5Gbps ports and I would like to setup Proxmox on two identical SSD drives. I also want to configure a bridge on my ISP router and then configure the router as a firewall on top of Proxmox. My plan is to install HA on top of Proxmox too.

My goal is to separate both my normal WiFi connection into two or even 3 VLANs, one for normal devices, one for IoT and a third for Guest VLAN. And I would like the Home Assistant to have access to both my normal SSID and IoT VLANs.

For the Access point I have a mesh router that doesn’t support VLANs and I was thinking temporary to repurpose an old Netgear R7800 and here I don’t know whether I should simply configure the Guest SSID to be for the IoT or repurpose the 2.4GHz network and leave the 5Ghz for normal devices. Currently on the WiFi router I have OpenWRT but I am also considering switching to Voxel?

Can you maybe recommend some tutorials with what settings and setup to use and if you had similar network setup to give me some hints on what to

  • wwwwhatever@lemmy.omat.nl
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Ok, so it is not that hard then I guess. Install proxmox on the appliance, then install two vm’s, HA and pfsense. Deal with further segmentation of your lan and the bridge to the router in pfsense.

    But if you ask me, drop the idea of vlans for appliances and keep it simple. Only make a guest network on WiFi, but using vlans is a pita, people want to stream to tv’s, use the app to control heating, etc. If you are concerned about appliances connecting to internet, just block internet access in OpenWRT or pfsense.

    • ChiefSinner@lemm.ee
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      Personally, I’d advise to use opnsense over pfsense. Opnsense kernels are more up to date, and the devs are less toxic.

      Ipfire is a Linux alternative that is easy to use, just no otp.