There is a massive amount of operating systems already. List of operating systems.

Why would you like to create a new one? A lot of the existing systems are specialized for use case and or hardware.

If you want something for general PC use then you have the software problem afterwards, an OS is useless without software support. You need a critical mass of supported software before it takes off. Means money and time.

If you want to make it windows compatible you have the copyright problem, if you are flying to close to the sun it will burn you before you get to your destination .

TL:DR to high effort, low outcome.

Edit: spelling

You can still edit titles you know

You are correct, there is a lot more to dive in like NAT, IPv6, static or dynamic address, UPnP, MAC address, subnet space etc.

But I wanted to keep it simple.

DHCP (Dynamic Host Configuration Protocol ) is a communication protocol that is used to coordinate a network via a server. The server in most home cases is your internet router. It coordinates the network.

Think of your network as a town with streets, every street has a unique name aka network address. So when a new device gets into the town it gets a unique address in a certain format, when requested by the clients. Mostly IPv4 i.e. 192.168.178.20.

Second there are ports. Ports are the house numbers of the streets. So if two devices use the same IP they still can be differentiated by using different ports. To address a specific port you write it behind the IP, in our example 192.168.178.20:80. So we use port 80.

To come back to the beginning the router coordinates the IP addresses and the ports from your internal network via DHCP and makes sure every device is accessible and no doubles.

There is a lot more but very briefly this is it.

Check out FHEM, you connect them via MQTT

To report back, my system is up and running. Used my spare odroid xu4 with dietpi for it. Put it all in a case and attached a cheap Nooelec stick. Waiting for my antenna today and to decide where to put it under the roof.

Fine tuning for best reception location will be taking a while to be honest.

Here is an article that explains what you are thinking about.

In short, you can’t.

A bit longer, while in quantum dimentions it is meanwhile obvious that superposition exists. As shown by many experiments. In the marco world it seems that there is a threshold of factors still to be determined what makes reality happen even if nobody experience it on a conscious level.

You could als checkout some Kurzgesagt videos.

Uhh, this seems like a completely new rabbit hole to dive in.

For lurking without the need for an account I use this https://feddit.de/post/7289677 app on android

Jep, it seems like Damocles Sword was hanging above us the whole time (⊙_⊙)

This seems to affect ZFS >=2.2.0. Ubuntu 22.04 LTS is on ZFS 2.1.5

Nope!

OpenZFS through 2.1.13 and 2.2.x through 2.2.1 contain this bug.

This issue occurs less often in version 2.2.1, and in versions before 2.1.4, because of the default configuration in those versions.

From here

For all Proxmox users it looks like the new ZFS kernel module with the patch is included in the opt-in kernel 6.5.11-6-pve for now.

The kernel 6.5 actually became the default in Proxmox 8.1, so a regular dist-upgrade should bring it in. Run “zpool --version” after rebooting and double check you get this:

zfs-2.2.0-pve4 zfs-kmod-2.2.0-pve4

As this versions are patched for bug.

• Don’t post personal information
• use throwaways
• don’t take the strangers you communicate with, as trustworthy friends

Syncthing to my selfhosted proxmox server at home then rclone encrypted and unencrypted depending on content, to my cloud storage. Fully automtatic meanwhile.

Rclone syncs to various cloud services so the provider doesn’t matter from a technical point of view.

It is!

So since the LXC route is promoted here take a look into these Helper Scripts they make the use of LXC very easy.

That said you could still adjust parameters afterwards and when you feel comfortable with.

Calibre Server to host.

KOreader to install on my favorite reader and direct connect to calibre.

Pocketbook as my favorite reader.

This is a repost from my suggestion some weeks ago:

I went for the ASRock J5040 board, 16gb ram a 500gb m.2 as system using a PCI adapter , 2x4tb ironwolf as ZFS mirror pool, 350 W power supply all in the node 304 fractal case for 550 euro alltogether.

Runs proxmox as hypervisor for VM or Container. 6 LXC running motioneye, plex, pyload with openvpn, syncthing, rclone cloud backup and openbookshelf.

Typical power usage is around 20W

That said it could also run on PicoPSU

Jep, low carb, no added sugars.

Select food that keeps the blood sugar from going nuts.

Not yet. All of the LXC containers run on 2 cores of the 4 and 2gb of RAM and 512MB swap where reserved. I can address more power if needed.

As none of my services run constant on full power the low power of the CPU is not a problem. I serve only my home with it.