Requirements often depend on the type of building occupancy and the chance of fire spread to neighboring buildings.

It’s also torches and everything after the regulator, which run at much lower pressure. At least in NZ

I think it might be because they’re connected and disconnected regularly so misconnection is a common problem, even with colour coding. Gas work on houses involves actually putting the fittings on pipe and is done by people who should be concentrating more on that rather than on what they’re about to weld/cut.

“Lossless” isn’t the term you want; that refers to not lossily compressing the main data. Lossless compression or storage of media is very rare outside of text and sometimes audio, because it ends up so large.

You want to preserve metadata. That applies regardless of how lossy the data compression is.

I’ve heard flammable gas uses reverse (left hand) thread to prevent cross connection. At least for welding gases in NZ; not sure about natural gas.

From article:

He said the term “coconut” was a “well-known racial slur which has a very clear meaning” to the effect that “you may be brown on the outside, but you’re white on the inside. In other words, you’re a race traitor – you’re less brown or black than you should be.”

That’s a different definition of ‘coconut’ than I hear here in NZ. Here it’s usually just a (derogatory) term for any Pacific Islander, because they come from where coconuts come from.

Gotta love slang/slurs.

Any hard drive can fail at any time with or without warning. Worrying too much about individual drive families’ reliability isn’t worth it if you’re dealing with few drives. Worry instead about backups and recovery plans in case it does happen.

Bigger drives have significantly lower power usage per TB, and cost per TB is lowest around 12-16TB. Bigger drives also lets you fit more storage in a given box. Drives 12TB and up are all currently helium filled which run significantly cooler.

Two preferred options in the data hoarder communities are shucking (external drives are cheaper than internal, so remove the case) and buying refurb or grey market drives from vendors like Server Supply or Water Panther. In both cases, the savings are usually big enough that you can simply buy an extra drive to make up for any loss of warranty.

Under US$15/TB is typically a ‘good’ price.

For media serving and deep storage, HDDs are still fine and cheap. For general file storage, consider SSDs to improve IOPS.

Yeah, I posted it to the wrong sub.

SpaceX has enough of a lead over everyone else that I don’t think them simply being denied government contracts is feasible, in a too-big-to-fail way.

You’d see some kind of forced nationalisation or being strongarmed into selling to another defense contractor on national security grounds.

Elmo might choose some kind of “if I can’t have it, no one can” sabotage though.

B key vs M key. Laptop likely needs a SATA M.2 using B or B+M keying, you have a PCIe x4 drive with M keying.

Built in fuses protect only downstream of where the fuse is. The supply flex is therefore not protected, despite often being the most damaged part.

Local fusing provides notable advantages, even without ring finals. In particular, one failed appliance doesn’t necessarily take out the whole circuit, and lower draw appliances can be more closely fused (e.g. 3A) reducing available fault energy.

Waze is of course owned by Google…

It’s pretty common to own a domain but not actually host the email server; doing on-premises email is a security PITA and most providers simply blacklist large swathes of residential and leasable (e.g. VPS) IPs.

Unfortunately, if you get someone else to host your email, they often charge by the account, not by the domain. Setting up a new mailbox is therefore irritatingly expensive.

A catch-all email works well, though, and is free from most of the hosting providers. Downside is you get spam…

Jane@JaneDoe certainly seems more common than mail@JaneDoe.

South Australia had a blackout a few years back because the grid standards were lax on how they should be configured, so the manufacturers had set the defaults overly conservatively.

It’s a learning moment but should be a solved problem.

Any grid stability issues can also be resolved by constructing more synchronous condensers.

Yeah, I have no idea either, but it’s been around for more than a decade so it should be fairly easy to find a library that duplicates it.

I would be wary of AI-based solutions. There’s a risk of it picking up e.g. satirical/spoof sponsorships as actual ads, and perhaps not detecting unusual ads.

I’m slightly terrified of the day someone starts getting AI to reword and read out individual ads for each stream.

Indeed, the US has a major lack of fixed-line competition and lack of regulation. Starlink doesn’t really help with that, at least in urban areas.

I’m not familiar with the wireless situation. You’re saying that there are significant coverage discrepancies to the point where many if not most consumers are choosing a carrier based on coverage, not pricing/plans? There’s always areas with unequal coverage but I didn’t think they were that common.

Here in NZ, the state funding for very rural 4G broadband (Rural Broadband Initiative 2 / RBI-2) went to the Rural Connectivity Group, setting up sites used and owned equally by all three providers, to reduce costs where capacity isn’t the constraint.

You definitely would have legal issues redistributing the ad-free version.

Sponsor block works partly because it simply automates something the user is already allowed to do - it’s legally very safe. No modification or distribution of the source file is necessary, only some metadata.

It’s an approach that works against the one-off sponsorships read by the actual performers, but isn’t effective against ads dynamically inserted by the download server.

One option could be to crowdsource a database of signatures of audio ads, Shazam style. This could then be used by software controlled by the user (c.f. SB browser extension) to detect the ads and skip them, or have the software cut the ads out of files the user had legitimately downloaded, regardless of which podcast or where the ads appear.

Sponsorships by the actual content producers could then be handled in the same way as SB: check the podcast ID and total track length is right (to ensure no ads were missed) then flag and skip certain timestamps.

Starlink plugs the rural coverage gaps, but in urban areas it’s still more expensive than either conventional fixed-line connections or wireless (4G/5G) broadband. Even in rural areas, while it’s the best option, it’s rarely the cheapest, at least in the NZ market I’m familiar with.

It also doesn’t have the bandwidth per square kilometre/mile to serve urban areas well, and it’s probably never going to work in apartment buildings.

This is a funding/subsidisation issue, not so much a technical one. I imagine Starlink connections are eligible for the current subsidy, but in most cases it’s probably going to conventional DSL/cable/fibre/4G connections.

I expect they are talking about the ‘irrevocably’ part, as one of the core tenets of GDPR is that consent can be withdrawn.

I couldn’t say whether or not that applies here.

We’d call that a sack barrow on NZ, usually. I’d think of a dolly as being four wheels.