To be fair, you can easily rebind all the keys to be more normal by adding a .nanorc. Though, Ctrl-Z conflicts with suspend in many terminals, so I keep that one as Ctrl-U. A .nanorc also allows turning on mouse support, changing the color scheme, etc.
Except in very rare configurations (i.e. not 99.9% of residential), you do not want to have multiple paths to ground within a system. All grounds should go to the tied ground/neutral bus in the main breaker panel, which then goes to earth via a ground rod or a clamp to a copper gas/water line, etc. Otherwise you can have current flowing in ways that the system isn’t designed for, which at the least can trip breakers and GFCIs, and at worst exceed the rating of the wires in a short condition and cause a fire.
Except in very rare configurations (i.e. not 99.9% of residential), you do not want to have multiple paths to ground within a system. All grounds should go to the tied ground/neutral bus in the main breaker panel, which then goes to earth via a ground rod or a clamp to a copper gas/water line, etc. Otherwise you can have current flowing in ways that the system isn’t designed for, which at the least can trip breakers and GFCIs, and at worst exceed the rating of the wires in a short condition and cause a fire.
You can make a one-time donation via GitHub Sponsors.
You can change that in the
nanorcalong with changing key binds, colors, and the like.