The marlin build from creality is fine but klipper is another option if you’ve got a raspberry pi or an unused PC lying around.

I think there’s also some marlin forks around for ender 3s but I’ve never looked into those.

I mean the same way, retraction isn’t pulling the molten filament out of the nozzle in FDM so I’m either filament or peeler based extrusion you just run it in reverse briefly.

https://cocoapress.com/

Not to mention the patent for heated build platforms wasn’t filed for something like 4 years after the first heated bed was put to use. Stratasys only has the patent because that bought the company that filed it last year.

Also the heated bed was first put to use in 2010 as a way around the stratasys patent on heated build chambers, they never even thought to heat only the best.

Nah brother just has CAKE.

Aside from what’s already been mentioned there’s the Qidi plus 4. Reviewers seem to like the newer Qidi printers but I have no clue how closed off their ecosystem is. Also seems to be about the price seems to be 800 usd which is cheaper than a Prusa but more expensive than some of the other options given.

I recently saw an A8 voron switchwire conversion, what I’m taking away from that and this is first A8 mod should be a metal frame.

I work in retail, but my homelab isn’t super extensive just a nas, a Plex server, and a couple proxmox boxes.

Closet I’ve ever come to being in IT was back when I was still in college and took some a networking class and some web development classes but that was many moons ago.

This the route I went too, a couple years ago I found a tiny form factor Lenovo with a 6500t on eBay for a little under 70 bucks shipped and then I found a tiny Dell with a 9500t on my local Craigslist for 100 bucks.

They’re good little boxes.

You’re probably on the wrong firmware version for ABL. Check the biqu website to see if there’s a version of the firmware specific for use with an ABL sensor. Bigtreetech also has a GitHub with a lot of stuff you can look for it there.

Latency isn’t the only issue.

it’s slow, symbolic and hard linking don’t work correctly, and permissions and attributes aren’t recorded.

Pfft everyone knows oxidation happens at the anode and reduction happens at the cathode, this should not qualify me to run for office.

Your point still stands but only like half the population is of age to run for president so really it’s like 150 million or less. Still a fuck ton of people.

If I’m understanding my Google search correctly it would actually be planetary system since they were looking a planet in an nothing system. I think by definition star systems don’t include planets.

Maybe not go as far as banning white parents but I’ll get behind banning Texas parents based solely on the definition of abnormal.

Abnormal - deviating from what is normal or usual, typically in a way that is undesirable or Worrying.

Texas has a population of 30.03 million people or just 0.4% of the world population that means normally 99.6% of the worlds population live outside of Texas and this is concerning because these 30 million people could live literally anywhere else and just they stay in Texas, this is abnormal.

Wet pla also apparently gets brittle over long periods of time which can cause issues depending on your printer setup. This is only an issue if you are storing spools open for long periods of time.

Thanks for believing in me child.

Piracy has never been theft, it has always been and still remain copyright infringement. That being said go ahead and pirate, I’m not your dad.

I didn’t even know jellyfin had hw transcode till this post but I’m with this guy, Intel’s qsv is great. I have my plex server running bare metal on an gen 2 HP chromebox. It’s dual core but hw transcode with Intel QSV will do like 20+ 1080p streams.

Why not, it’s streets ahead