There is an extra icon for cross-posting

I don’t know why this keeps happening! argh!

Ah! My device is still on 12+ and there is no official support for 13+

If I understood correctly Lemmy 0.18.0 contains breaking changes which need an adoption for current clients to work. Since I’m pretty sure that most instances will upgrade asap that step was necessary.

Wow! That’s awesome! What additional modifications were needed?

For the eSUN PLA+ I’m using 210°C for all layers and a consistent bed temp of 60°C.

Still using a 0.4 nozzle and a 0.2 layer height.

That’s really strange.

What’s the temperature you are printing the eSUN PLA+ filament? Maybe it’s too low and the noozle scratches on the print?

There is another official(?) list:

https://redditmigration.com/

Are you sure that is related to the filament? Sounds more like the stepper motors or a some debris on the wheels.

I hope that drying will help. I tested white and orange. Let us know if it worked or not.

I’m using eSUN PLA+ for some weeks now on a Voxelab Aquila X2 (Ender 3 V2 clone) and it’s slightly wet resulting in some stringing I did not experience with other PLA.

You might be aware that it needs a higher temperature than normal PLA, I print with 210°C and overall I’m quite happy with the results.

If you want to try using Blender I recommend this video to check out if that’s the road you want to go:

Learn Blender for 3D Printing - Complete Quick and Easy Guide (Beginner)

Depending on your experience you might check out existing models on sites like printables.com or thingiverse.com