So they progressively increase closing force if it keeps detecting something but the owner keeps trying to close it. I can vaguely see the reasoning only if they aren’t confident in the frunk sensor for some reason. I mean garage doors solved this problem forever ago without having to resort to something like that.

I wonder if the “vision-based everything” mandate from Musk applies outside of autonomous driving features? Makes sense to not be confident in it if it’s just a camera…

I own the Sovol SV06, it was my first printer but it was also the cheapest option for me ($169 IIRC). The Sovol has given me two problems in the entire time I used it:

1. When it came in, the extruder was jammed. Wouldn’t print or extrude any filament for some reason. Followed a 2 minute video on Sovol’s Amazon page to resolve it (although it did involve disassembling the hotend).

2. The extruder decided to encase itself in plastic one day when I printed something on it. That was a bitch and a half to clean, had to take a heat gun to it to soften the plastic then scrape it off without burning myself. My best guess is it was caused by me forgetting to run bed leveling after moving the printer a bit, hasn’t happened again.

Other than those two times it just works every time I need it. It was sitting dormant for ~3 months and I just kicked off a print yesterday, no problems. Fired right up and everything printed perfectly.

With that said, is it €239 of “Just works”? Probably not. I immediately couldn’t do some prints I planned because of the build volume (although all three of your options have the same build volume). So I’m already considering upgrading to an SV06 Plus. So check some of what you want to print that it’ll fit in 220x220x250.

I did some research on your other options and as far as I can tell, the main difference between them and the Sovol is the all metal hotend and print speed.

Sovol SV06 has an all-metal hotend so you can print high temperature filaments (PETG/TPE/CFN/etc) without worry (does require a harder nozzle most likely though). The other two seem to have some metal but are not fully metal, so if you want to hop into the more exotic materials you’ll have to upgrade those.

Second is speed, my SV06 prints at 80 mm/s. It is slow. Smallest prints take around 2-3 hours. My current print will be done after 24 hours. This is fine for me as most of my prints need complex geometry, so I’d rather it take longer and be accurate than run it too fast. The others claim a max speed of 250mm/s which would be a bit over 3x faster than the Sovol. If they can actually print at that speed without looking awful, that’s a pretty big upgrade time-wise.

If you need exotic filaments and don’t want to upgrade the hotend yourself for it then consider the Sovol. Other than that, the price in your region makes it not an option in my opinion. The Sovol just is a budget printer, only makes sense at budget prices. The Kobra and Ended you mentioned look very similar other than that, they both have auto bed leveling (a must have), same build size, very similar designs. Personally I’d lean towards the Ender, just for the community support. But do some research and see how many community member posts you see online resolved with the two. They seem to be functionally identical to me otherwise (just looking at a spec sheet, I do not have irl experience with either of these printers)

Last time this came up, just spoofing the Firefox user agent to Chrome made it work perfectly. Maybe they block it because they haven’t tested it on Firefox yet, but it works as well as it does in Chrome.

And if they haven’t had the time to validate it in Firefox yet, that is a conscious choice by MS to not dedicate time specifically to validating in Firefox and treating it as a second-class web browser.

The not-so-quiet part here is “Homeless or poor people don’t deserve to have their basic need of a toilet met”

They call it a “need” but proudly talk about how they’re taking it away from the less fortunate.

Not discounted currently (I’m not convinced BF/CM aren’t all fake), but I recently got a Sovol SV06 for ~$209 from Amazon and had seen it at that price for several months, so it’ll probably come back down again.

I had one minor issue but the troubleshooting video on the Amazon page showed me how to fix it, and it’s been printing like a champ with no issues so far. FDM printer (i.e., not resin) with an all metal hotend so it can handle more exotic/stronger filament types. The auto bed leveling is also super great, most Enders don’t come with that and from what I’ve heard bed leveling is a bitch.

Also it’s been my only 3D printer ever so I don’t have much of a reference point except the ones we had in university that were almost always broken. (Or at the least unlevel)

Owning a ghost gun is a crime, right?

(Ignoring the fact that “ghost gun” is a meaningless and intentionally emotionally charged term)

In New York, yes. In the vast majority of the US, no. It’s illegal to file the serial number off an existing firearm, but 100% legal in most states to manufacture your own unserialized firearms for personal use. Just cannot be sold/transferred.

I’d note the article you linked says nothing about how many of those are actually 3D printed, it is infinitely easier to deface the serial number on an existing firearm than it is to 3D print one.

Ani.social user chiming in, lovely little instance. No drama and the local page is just cute art and episode discussions (admittedly most of the episode discussions are empty though).

Android auto runs on your phone. Android automotive runs in your car.

Yes, but Android Auto does need some work on the car OS side to operate, i.e. within Android Automotive in this example (although Blackberry QNX is probably more common these days, automakers are moving away from it)

I mean, I don’t like my car updating but I’d rather things get fixed than not. Software recalls are a huge headache in the auto industry, and being able to just download an update that fixes something is way easier than going to a dealership and having them use very specific tools and software to update the car/modules.

It’s also used for anti-theft features for a lot of newer cars, if your car is stolen it can be remotely disabled entirely. That’s really what’s more scary in my opinion.

Not entirely unrelated, Android Auto is basically a projection app for Android Automotive.

Yeah, pretty much all new cars have some amount of cellular connectivity. Usually you can’t actually use it without paying some subscription, but the manufacturers use it to push updates.

It was a bug in that version of the distro IIRC, trying to install Steam would instead try to install the SteamOS desktop environment (or something along those lines). It has since been fixed to actually install the Steam client.

Obviously it was a bit silly he typed “Yes, do as I say” after seeing the message, but he was also literally following exactly what all the online guides said to do (other than the “Yes do as I say” part). Luckily it’s fixed now but I do think it was a really good demonstration of what the video wanted to see: “What might the average non-techie gamer face using Linux?”

Almost always this is a player issue as mentioned. I’ve had similar issues with some files where audio just doesn’t work on one player but works fine for another. Same with subtitles. Set to an external player like VLC and see if that fixes it. (For what it’s worth, I mostly access Jellyfin from my Chromecast and I have it set to prompt me for a player each time I start watching something, one of them always works but for my files it isn’t consistent which)

Interesting, I know personally one of my concerns with self-hosting an individual Lemmy instance (after losing my first account to the Vlemmy.net shutdown) was the threat of being held legally responsible for things cached on the server. Say someone uploads something illegal and my server caches it. Seeing it as an option to turn that off is nice, and for an instance only meant to be used by one person I’d imagine caching won’t have a huge impact on load times

Not surprised but got a source on those password claims?

Wow that is fucking awful in it’s entirety. Jesus fucking Christ, seems like just burnout and overwork are not the only issues present there. Goes a lot deeper than that with micromanagement and a “boys club” attitude, gross.

Also thank you for the link, I was so confused where to the rest of the post was.

I found what really helps Jellyfin on my Chromecast is setting the player manually. There’s a setting to make it ask which player to use when starting a show and if one doesn’t work, 99% of the time the other one works fine.

Sometimes switching players doesn’t fix subtitles for me, in those situations I usually have to toggle subs a few times or restart the stream and they actually work.

In my opinion it’s a minor enough inconvenience given Jellyfin is 100% free and open source, whereas Plex is tracking you and charging you. But of course maybe your media is in some more difficult format than mine.