$3 or less at a guess

, btw

Thanks I’ll warp back a few years and tell myself that.

I dunno, I use a mirror tile heated to 60⁰C. TPU and PLA seem to stick just fine. Have you tuned your first layer height?

I also give it a good scrub with isopropyl between prints.

That’s what I was using before, but my problem is my bed is fairly significantly warped… Inflexible glass fixes this entirely and I’ve had absolutely no issues with adhesion. At least not with PLA or TPU.

Although thinking about it I could clip the PEI to the glass giving it a flat bed…

It’s pretty much not reversible and the code is free to use, modify, and distribute forever. And if you do modify it you also must make those changes open source.

Very good news

The cancerousness is hugely dependant on what type of plastic you’re printing lol.

No the S1 is direct drive. I tried a retraction tower to little effect but perhaps I’ll try a wider range.

This one I accidentally printed with too many walls to squish much lol. I did another with one wall and no infill, came out the same appearance wise but squishes nicely.

I had read that TPU doesn’t really like to be retracted. I did a retraction tower and it didn’t seem to make any difference really at least in the ranges I tried. I have avoid crossing perimeters on (using OrcaSlicer) with something like 350% detour but that won’t help with the archway of course since those lawyers are just completely separate pieces

I’ll have to try the combing setting though

I mean snow’s only a factor in some places

But this time seize the fucking bank

I was able to use Glassdoor just now with an account from there worked perfect

I’m pretty sure insults fall under free speech protection in the US, and in fact this case/law has been overruled by higher courts for this reason.

As long as you’re not committing slander or libel, you can insult anyone for anything really. And slander/libel is very hard to prosecute as you have to prove that the claims aren’t true and they they also caused tangible damage.

Because of the lack of barrel. But in this case the gun was loaded so it should come out full force

HEIC is not proprietary to Apple at all, they were just one of the early adopters of it.

My Android phone takes pictures in HEIC/HEIF by default, and it’s not nearly as much of a problem anymore almost all software can handle the format now.

That’s why I’m kinda hoping Apple would adopt standard RCS and then the ball’s on Google for not cooperating.

Fedora has always had good Mac support in my experience. Should just be able to hold option key at boot and select the USB.

If you want to continue dual booting I’d use the Mac’s recovery mode to shrink the partition so it leaves space first. Other than that it should be just like normal. Hold option to get the boot menu.

underwear, or in pajamas

What’s the difference

I’ve never been in tech professionally, I’m a truck driver (now working in the office of company but still drive sometimes) but I have always been into tech. I selfhost as much as possible. Bitwarden, jellyfin, seafile, etc. and also run a Lemmy instance. I like tech projects and control.

Seriously, ever heard of Intel AMT? It gives administrators such deep access to the computer that they can view and control your screen (regardless of OS you’re using), power the device on remotely, etc.